This is the small metal clip that goes around the leaves of a leaf spring, usually about 1/4 of the way down the length of spring. They are intended to keep your leaves in-line and to keep them from spreading too far away from the main leaf in the event...

Leaf spring wear pads go into small holes near the end of individual leaves to prevent leaf dig-in wear and noise caused by metal on metal friction during spring flex. Specifications: 2.5" x 2.5" Square Surface 5/8"L x 3/8"H x 3/8"T Peg What's In The Box: 1 Pad included (multiples...

This is a U-bolt top cap/plate for Chevy and GM trucks with 2-1/2" wide rear springs. This plate is used on just about every GM truck and van that uses square shaped U-bolts. This part fits the following make/models: 1969 - 1994 K5 Blazer 1988 - 1998 Chevy and GMC 1500...

Leaf Spring Clip wear pads go inside the clips on GM/Chevy trucks to prevent leaf dig-in wear and noise causes my metal on metal friction during spring flex. These are OE Spec and are meant to replace the original pads in the original style clips. For use with 2-1/2" wide...

Actual bolt may be plated or non-plated Other sizes are available What's In The Box: 1 bolt 1 nut *Finish may vary

This set will be: 9/16" Diameter Rod x 2 1/2" Wide Square Bend Grade 5 Hardened Rolled National Fine Threads  Including High Nuts and Extra Thick U-bolt rated Washers Product Description:This is a BRAND NEW set of Grade 5 hardened U-bolts. These are the real thing, NOT the the low...

Leaf spring friction pads go into small holes near the end of individual leaves to prevent leaf dig-in wear and noise caused by metal on metal friction during spring flex. Specifications: MGM7 - Surface diameter of 2 1/8" with a 3/8" peg MGM5 - Surface diameter of 2 7/16" with a...

Product Description: This is a brand new U-bolt bottom plate for 1 ton trucks from 1973 to 1987 with 3.5" axles. It's made from cast steel and is very heavy duty. Vehicle Applications: 1973 - 1987 Chevrolet/GMC C30 & K30 What's In The Box: 1 Bottom Plate

This is a 5/16 x 5" Center Bolt for a leaf spring. It has threads most of the way down and extra length can be cut off after the nut has been tightened. Other sizes are available as well. *BE ADVISED - Leaf Spring Center Bolts are NOT hardened and...

Custom U-bolts made to your specifications. Product Description: This is a BRAND NEW set of Grade 8 hardened U-bolts. These are the real thing, NOT the the low grade, under sized "universal" U-bolts that you usually get with most lift kits and aftermarket bolt-ons. We custom make all of our U-bolts using the highest grade...

Chevy GMC Silverado Sierra 1500 Pickup Rear Clip Leaf (#2 / Middle Leaf) Attention: If your clip leaf (the middle leaf) is broken, your entire spring may not need to be replaced. This is VERY common with the trucks using 3 leaf springs. Many GMC/Chevy trucks with low to medium...

OEM # 14022597 / 6270217 This part fits the following make/models: 1967 and up Chevy/GMC trucks with 2-1/2" wide leaf springs using 9/16 bolt holes. This is a rear leaf spring shackle. This is built from the primary OE Spec design, so it is the best adopted design from all the...

Custom U-bolts made to your specifications. Product Description: This is a BRAND NEW set of Grade 5 hardened U-bolts. These are the real thing, NOT the the low grade, under sized "universal" U-bolts that you usually get with most lift kits and aftermarket bolt-ons. We custom make all of our U-bolts using the highest...

This set will be: 9/16" Diameter Rod x 2 3/4" Wide Round Bend x 6 1/2" Legs Grade 5 Hardened Rolled National Fine Threads  Including High Nuts and Extra Thick U-bolt rated Washers Product Description:This is a BRAND NEW set of Grade 5 Hardened U-bolts. These are the real thing,...

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
43-818	Front	2,630lbs	2

This is an upgrade from the stock springs on the Excursion with an additional 600lbs capacity per spring, making the total front suspension capacity 1200lbs heavier than stock. These springs also offer an average of 2" of lift above stock for the front of the truck. Standard versions are also...

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
43-1263	Rear	3,000lbs	4/1

OEM # F81Z5560CA / 81A5580CD C Code Equivalent Spring *This spring offers a 750lbs (1500lbs both sides total) upgrade to the stock capacity for the Excursion as well as around a 2" to a 2-1/2" increase in rear height. This is the perfect way to do a small lift and make good...

OEM #  6272088 This part fits the following make/models: 1973 - 1987 Chevy/GMC K10 K20 K30 Series Trucks This is a front leaf spring Shackle, bushing and bolt kit (rear of front spring) for: *This kit does one spring on one side of the truck *Includes hardware What's In The Box:...

This part fits the following make/models: 1999 - 2008 Ford F250/F350/F450/F550 Superduty and Excursion This eyebolt measures 18mm x 150mm, comes complete with the nut and is designed specifically for this front eye application. Changing the front springs on these trucks almost always requires cutting the old eyebolt out because the factory...

OEM #  3C3Z5798AA / 3C3Z-5798-AA / F81Z5798AA / F81Z-5798-AA Product Description: Brand New Heavy Duty version of the OE spec U-bolt plate for vehicles using either the 3.5" or 4" axle tube diameter Fits: 1999 - 2010 - F-250 Superduty 1999 - 2010 - F-350 Superduty 2000 - 2006 - Excursion  What's In...

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
22-797HD	Rear	3,300lbs	7/1

*1999 and Up Chevy/GMC Silverado/Sierra Trucks require front eyebolt adaptor kit In order to use this spring This is an upgrade for the stock springs on any model of Chevy/GM Pickup. It was designed more for extra heavy applications on the 3500 1 ton models, but it can be used...

This part fits the following make/models: 1992 - 1996 G30/3500 Chassis Motorhomes (both eyes of the rear spring) G1500 G2500 and G3500 Savanna and Express vans 2004 - Current Colorado and Canyon (both eyes on the rear springs) 1992 - 2000 Blazer, Jimmy, Tahoe, Yukon, Denali, and Escalade (both eyes on the...

This part fits the following make/models: 1988 - 2007 1/2 Chevy Silverado 1500 1988 - 2007 1/2 GMC Sierra 1500 1988 - 2010 Chevy 2500/2500HD 1988 - 2010 GMC 2500/2500HD 1988 - 2010 Chevy 3500/3500HD 1988 - 2010 GMC 3500/3500HD 1992 - 1999 Chevy/GMC Suburban 1500 1992 - 1999 Chevy/GMC Suburban...

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
22-1221	Rear	1425 lbs	2/1

OEM # 15033928 Upgrade your Chevy Silverado 1500 or GMC Sierra 1500's rear suspension with our top-of-the-line replacement leaf spring. Engineered specifically for 1999-2006 models, this standard duty leaf spring boasts three leaves for optimal strength and stability. Perfect for DIY auto enthusiasts, installation is a breeze with precise fitment and...

This part fits the following make/models: 1988 - Current Silverado and Sierra 1500 & 1500HD - w/3.5" axle tube diameter 1988 - 2010 Silverado and Sierra 2500 & 2500HD - w/3.5" axle tube diameter 1992 - 1999 Suburban 1500 - w/3.5" axle tube diameter 1992 - 1999 Suburban 2500 - w/3.5"...

This part fits the following make/models: 1992 - 1999 Chevy Tahoe 1992 - 1999 GMC Yukon 1988 - 1992 Chevy Full Size Blazer 1999 - 2000 GMC Denali 1998 - 2000 Cadillac Escalade 1992 - 1999 Suburban This is a leaf spring hanger for the rear end of the rear leaf...

This part fits the following make/models: 1999 - 2017 Chevy Silverado 1500 and GMC Sierra 1500 (Front eyes of the rear spring) 1999 - 2010 Chevy Silverado 2500/2500HD and GMC Sierra 2500/2500HD (front eyes of the rear spring) 1999 - 2010 Chevy Silverado 3500/3500HD and GMC Sierra 3500/3500HD (front eyes of...

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
43-1263HD	Rear	4,400Lbs	6/1

This is an upgrade for the stock spring.

Custom U-bolts made to your specifications. Product Description: This is a BRAND NEW set of Grade 8 hardened U-bolts. These are the real thing, NOT the the low grade, under sized "universal" U-bolts that you usually get with most lift kits and aftermarket bolt-ons. We custom make all of our U-bolts using the highest grade...

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
22-1139	Rear	1,200lbs	3/1

This is a direct OE Spec replacement for the original ZR2 spring (It will not fit standard S-10 and Blazer models). The ZR2 pickup came with two different OEM 4 leaf springs. This is the only version available in the aftermarket. This version has 1" less arch and may result...

Product Description: This is a replacement leaf spring eye bolt with nut. Its a grade 10.9 hardened steel bolt that typically fits many standard truck and van springs. 14mm O.D. 100mm Long Actual bolt may be plated or non-plated What's In The Box: 1 bolt 1 nut We do combine...

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
43-818HD	Front	3,950lbs	3

This is a major upgrade from the stock springs. Standard versions are also available for normal duty applications. These springs are ideal for work trucks that are loaded with commercial grade snow plows.

Custom U-bolts made to your specifications. Product Description: This is a BRAND NEW set of Grade 5 hardened U-bolts. These are the real thing, NOT the the low grade, under sized "universal" U-bolts that you usually get with most lift kits and aftermarket bolt-ons. We custom make all of our U-bolts using the highest...

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
43-1199HD	Rear	2,200lbs	4/1

This is a HEAVY DUTY upgrade for the OEM factory spring.

OEM # 1C3Z5776BA / 3C3C5776AB / 3C3Z5776AB / F81Z5776CA This part fits the following make/models: 1999 - 2010 Ford SuperDuty trucks using 16mm rear eyebolts This is a BRAND NEW Rear Leaf spring Shackle for 1999 - 2010 Ford superduty trucks using 16mm rear eyebolts. This is NOT a Dorman part. This is made by...

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
22-793	Rear	1,425lbs	3/1

*1999 to current Chevy/GMC Silverado/Sierra 1500 pickup truck (requires front eyebolt adaptor kit.

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
22-547	Rear	2,600lbs	8/1

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
34-1451HD	Rear	2,200lbs	4/1

This is an upgrade for the stock 4 leaf spring. 

Leaf spring axle seats are weld on replacements for original axle seats or for custom axle applications 2.5" wide For use with 3" axle tube diameter Made from High Grade OE Spec Steel What's In The Box: 2x Axle Seats

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
22-1269	Rear	2,025 lbs	4/1

OEM # 15711753

This is a pair of cast steel leaf spring blocks. They can be used to raise or lower a vehicles height depending on the particular vehicles axle to spring set up. They have a standard pinion angle built in to help reduce the chance of needing to use shims. These...

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
22-687	Rear	1,350lbs	3/1

This is a direct heavy duty replacement for the OEM factory spring. NOTE: This is NOT the correct spring for 1995 and up Blazer, Jimmy and Bravada or the High Rider ZR2 or ZR9 models.

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
34-1451	Rear	1,700lbs	3/1

This is a direct replacement for the stock 4 leaf spring.

OEM # E6TZ5776A / E6TZ5776B / ZZM027144 This part fits the following make/models: 1980 - 1996 F-150 2wd w/ 2 1/2 inch wide springs 1997 - 2004 F-150 2wd & 4wd 1997 - 1998 F250XL Variant w/2 1/2" wide springs 2004 F-150 Heritage w/2 1/2" wide springs 1983 - 2010 Ranger & Mazda B Pickups...

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
22-1567	Rear	1,900lbs	2/1

OEM # 25976356 Your suspension is one of the most critical components in your truck, don't take a gamble with subpar off brand springs. If you're looking for a new replacement OEM spec leaf spring for your 07 - 18 Chevrolet Silverado or GMC Sierra because your truck just doesn't ride or...

This part fits the following make/models: 1967 - 1981 Chevy Camaro 1968 - 1981 Chevy Nova 1967 - 1981 Pontiac Firebird This is a T Bolt set for the Axle Spring Plate/Seat of the rear leaf springs on Camaro Firebird and Nova. They are 7/16 diameter and 1-3/4" long. It's an...

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
21-339	Rear	660lbs	5

The 5 leaf is heavier than the mono-leaf set up and is not meant to be a direct replacement unless you are looking for a little more height or strength in the rear. The front bushings are preinstalled but this spring does not include the rear bushings.

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
22-403	Rear	2,350lbs	6

This is a brand new U-bolt top cap/plate for 1 ton (will work on 1/2 ton and 3/4 as well) GM Trucks with square bend U-bolts and 2-1/2 inch wide springs (typically ranging from 1985 - current). Its made from cast steel and is very heavy duty. What's In The Box:...

These eye bolt adaptors convert 16mm to 9/16" allowing you to use rear leaf springs from the previous generation (1988-1998) Chevy/GMC pickups (1/2 ton 3/4 ton and 1 ton) on the newer generation trucks which come with lighter capacity leaf springs and are typically a lot more expensive. It's a...