Product Information: 1988 - 1998 Chevy/GMC 2wd 1500 Pickup 1988 - 1998 Chevy/GMC 2wd 2500 Pickup 1988 - 1998 Chevy/GMC 2wd 3500 Pickup What's In The Box: 1 Bracket

FLD Models Grill mounts Used to mount grills

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
22-909	Rear	1,750lbs	4/1

This part fits the following make/models: 1999 - 2010 Ford SuperDuty trucks using 16mm rear eyebolts. This is NOT a Dorman part, this is made by an actual SRI OE Spec manufacturer, so it is heavier and stronger than the OEM ford part or any inferior reproduction, which means you dont...

Chevy GMC Silverado Sierra 1500 Pickup Rear Clip Leaf (#2 / Middle Leaf) Attention: If your clip leaf (the middle leaf) is broken, your entire spring may not need to be replaced. This is VERY common with the trucks using 3 leaf springs. Many GMC/Chevy trucks with low to medium...

Product Description: This is a BRAND NEW hanger bracket for the front radius rod/arm on the right side of the front suspension on: 1987 - 1997 F-150 1992 - 1997 F-250  This is NOT a Dorman part. This is made by an actual SRI OE Spec manufacturer, so it is...

This part fits the following make/models: 2000 - 2009 Dodge Dakota 2000 - 2003 Dodge Vans w/2.5" wide springs This is a brand new shackle for the rear of the leaf springs on the make/models listed above. It is a direct replacement for the original OE shackle. What's In The Box: 1...

Leaf spring axle seat spacer goes between the axle and leaf spring What's In The Box: 1x Axle Seat Spacer

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
22-1485	Rear	1,600lbs	4/1

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
34-1343	Rear	2,860lbs	3/1

This is a direct replacement for the stock 4 leaf spring.

This is a BRAND NEW J Nut set with Bolts for the front frame bracket (3 per side) of the rear leaf springs on Camaro Firebird and Nova. It's an aftermarket replacement for the original OEM parts and has the same specifications to the original. What's in the Box: (6)...

Leaf spring axle seats are weld on replacements for original axle seats or for custom axle applications 2.5" wide For use with 3" axle tube diameter Made from High Grade OE Spec Steel What's In The Box: 2x Axle Seats

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
43-1783	Rear	1,900lbs	3/1

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
43-1781	Rear	1,500lbs	2/1

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
43-1199HD	Rear	2,200lbs	4/1

This is a HEAVY DUTY upgrade for the OEM factory spring.

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
43-1555HD	Rear	2,400lbs	4/1

This is an Extra Heavy Duty replacement for the stock three leaf or the four leaf version.

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
43-1679	Rear	1,500lbs	2/1

This is a Standard Duty replacement for the stock three leaf spring.

This part fits the following make/models: 1967 - 1981 Camaro 1968 - 1981 Nova 1967 - 1981 Firebird This is a BRAND NEW set of (2) Rubber Insulators with the smaller hole size (5/8") for the Bottom (left and right sides) of the rear leaf springs at the axle on Camaro Firebird...

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
43-818HD	Front	3,950lbs	3

This is a major upgrade from the stock springs. Standard versions are also available for normal duty applications. These springs are ideal for work trucks that are loaded with commercial grade snow plows.

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
43-1199	Rear	1,415lbs	3/1

This is a direct replacement/upgrade for the OEM factory spring. 

This is a 5/16 x 5" Center Bolt for a leaf spring. It has threads most of the way down and extra length can be cut off after the nut has been tightened. Other sizes are available as well. *BE ADVISED - Leaf Spring Center Bolts are NOT hardened and...

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
43-812	Front	2,030lbs	2

This is a direct replacement for the stock springs. Heavy Duty and Extra Heavy Duty versions are also available for trucks with snow plows installed or have need for heavy applications and height. U Code Equivalent Spring

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
43-770XL	Front	750lbs	1

Features: These leaves are specifically made for the front spring on Ford Superduty trucks based on OE Spec design and SRI specifications. They are fully tapered just like the original springs and have correct arch to match so that they won't dig into the existing #2 leaf. *Adding non-tapered leaves...

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
43-1681	Rear	2,700lbs	4/1

This is a Heavy Duty replacement for the stock leaf spring.

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
43-1263HD	Rear	4,400Lbs	6/1

This is an upgrade for the stock spring.

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
43-1289	Rear	5,900lbs	10

This is the original version of this spring and there is also an HD (Heavy Duty) version available.

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
43-1717HD	Rear	6,800lbs	5/1

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
43-1717	Rear	3,700lbs	2/1

This part fits the following make/models: 1999 - 2008 Ford F250/F350/F450/F550 Superduty and Excursion This eyebolt measures 18mm x 150mm, comes complete with the nut and is designed specifically for this front eye application. Changing the front springs on these trucks almost always requires cutting the old eyebolt out because the factory...

Leaf Spring Clip wear pads go inside the clips on GM/Chevy trucks to prevent leaf dig-in wear and noise causes my metal on metal friction during spring flex. These are OE Spec and are meant to replace the original pads in the original style clips. For use with 2-1/2" wide...

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
43-781	Rear	1,250lbs	3/1

It is a direct replacement for the OEM factory spring. This spring has 4 leaves instead of the standard 3 leaf that comes on some models originally. This allows for extra hauling capacity and longer spring life. Its the perfect replacement or upgrade for any Ranger spring.

This part fits the following make/models: 1999 - 2010 F-250 Superduty w/ 3.5" axle tube diameter 2000 - 2006 Excursion 2009 - 2013 E-250 2009 - 2013 E-350 w/ 3.5" axle tube diameter Heavy Duty version of the OE spec U-bolt plate for vehicles with 3.5" axle tube diameters What's In...

Leaf spring wear pads go into small holes near the end of individual leaves to prevent leaf dig-in wear and noise caused by metal on metal friction during spring flex. Specifications: 2.5" x 2.5" Square Surface 5/8"L x 3/8"H x 3/8"T Peg What's In The Box: 1 Pad included (multiples...

These eye bolt adaptors convert 16mm to 9/16" allowing you to use rear leaf springs from the previous generation (1988-1998) Chevy/GMC pickups (1/2 ton 3/4 ton and 1 ton) on the newer generation trucks which come with lighter capacity leaf springs and are typically a lot more expensive. It's a...

This is a front leaf spring shackle made for use with 5/8 eyebolts. Its an aftermarket build and very heavy duty. What's In The Box: 1 Shackle

This part fits the following make/models: 1991 - 2001 Ford Explorer 1997 - 2001 Mercury Mountaineer This is NOT a Dorman part. This is made by an actual SRI OE Spec manufacturer, so it is heavier and stronger than the OEM ford part or any inferior reproduction, which means you don't...

This part fits the following make/models: 1947 - 1955 Chevy/GMC trucks This is a front leaf spring shackle, bushing and bolt kit for front springs on 1947 to 1955 Chevy/GMC trucks.

This part fits the following make/models: 1967 - 1981 Camaro 1968 - 1981 Nova 1967 - 1981 Firebird This is a set of (2) Rubber Insulators for the tops (left and right sides) of the rear leaf springs at the axle on Camaro Firebird and Nova. It's an aftermarket replacement for the...

OEM #  6272088 This part fits the following make/models: 1973 - 1987 Chevy/GMC K10 K20 K30 Series Trucks This is a front leaf spring Shackle, bushing and bolt kit (rear of front spring) for: *This kit does one spring on one side of the truck *Includes hardware What's In The Box:...

This part fits the following make/models: 1955 - 1956 C10 (front and rear springs) 1955 - 1956 C20 (front springs) 1955 - 1959 C20 (rear springs - 3600 series only) 1947 - 1955 C30 (front springs - 3700 series only) This is a front leaf spring shackle, bushing and bolt kit

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
69-257	Rear	1800lbs	3/1

This is the heavier replacement for the stock leaf spring.

Product Description: Fits 1-1/4 Pins Interchanges with Part # OEM -1664223C1 Dayton - 330-149 Flagg - E694-55 What's In The Box: 2 side bar shackles

Peterbilt Front Leaf Spring Hanger (one) for 1987 and Up Conventional Truck Model with 4" Wide Front Springs 5/8" Bolts What's In The Box: 1 Hanger Bracket

Interchanges with Part # OEM - 355420 Automann - MIH55205 What's In The Box: 1 Rubber Bump Stop (for one side of the truck)

This part fits the following make/models: 1990 - 1991 Ford E250/E350 w/3" wide springs This is a leaf spring hanger for the front end of the rear leaf spring on 1990 and 1991 Ford E250 or E350 Vans with 3" wide springs. This is NOT a Dorman part. This is made...

Part Number	Location on Vehicle	Spring Capacity	Number of Leaves
97-539	Rear	745lbs	4

It is a direct replacement for the OEM spring that comes on the Cherokee.

This part fits the following make/models: 1980 - 1996 Ford F150 2wd trucks w/ 2 1/2" wide springs This is a leaf spring hanger for the front end of the rear leaf spring on 1980 - 1996 Ford F150 2wd trucks with 2-1/2" wide springs. This is NOT a Dorman part. This...

Bi-metal bushing 1.5" O.D. x 1.25 I.D. x 4" length What's In The Box: 1 bushing

This part fits the following make/models: 1987 - 1998 Ford F250 or F350 trucks with 3" wide springs This is a BRAND NEW 6 Hole Leaf spring Hanger for the front end of the rear leaf spring on 1987 - 1998 Ford F250 or F350 trucks with 3" wide springs. This...

This is the small metal clip that goes around the leaves of a leaf spring, usually about 1/4 of the way down the length of spring. They are intended to keep your leaves in-line and to keep them from spreading too far away from the main leaf in the event...

This part fits the following make/models: 1980 - 1996 F150 4WD 1996 - 1997 Carryover F150 4WD w/ 3" wide springs ONLY 1980 - 1997 F250 1980 - 1997 F350 *Does NOT fit the 1997/1998 F-250 LightWeight Variant or F350 Dually with 2-1/4" wide rear springs These are NOT Dorman parts....