Showing all 22 results

Leaf Spring Clip Straps (1 3/4" - 2" - 2 1/4" - 2 1/2" - 3")

Leaf Spring Clip Straps (1 3/4" - 2" - 2 1/4" - 2 1/2" - 3")

This is the small metal clip that goes around the leaves of a leaf spring, usually about 1/4 of the way down the length of spring. They are intended to keep your leaves in-line and to keep them from spreading too far away from the main leaf in the event...

Leaf Spring End Tip Wear Pads Anti Squeak Insert

Leaf Spring End Tip Wear Pads Anti Squeak Insert

Leaf spring wear pads go into small holes near the end of individual leaves to prevent leaf dig-in wear and noise caused by metal on metal friction during spring flex. Specifications: 2.5" x 2.5" Square Surface 5/8"L x 3/8"H x 3/8"T Peg What's In The Box: 1 Pad included (multiples...

Leaf Spring Clip Wear Pads Anti Squeak Insert

Leaf Spring Clip Wear Pads Anti Squeak Insert

Leaf Spring Clip wear pads go inside the clips on GM/Chevy trucks to prevent leaf dig-in wear and noise causes my metal on metal friction during spring flex. These are OE Spec and are meant to replace the original pads in the original style clips. For use with 2-1/2" wide...

Leaf Spring Wear Pads Anti Squeak Inserts

Leaf Spring Wear Pads Anti Squeak Inserts

Leaf spring friction pads go into small holes near the end of individual leaves to prevent leaf dig-in wear and noise caused by metal on metal friction during spring flex. Specifications: MGM7 - Surface diameter of 2 1/8" with a 3/8" peg MGM5 - Surface diameter of 2 7/16" with a...

Chevy GMC - Trucks - Rear Leaf Spring Shackle

Chevy GMC - Trucks - Rear Leaf Spring Shackle

OEM # 14022597 / 6270217 This part fits the following make/models: 1967 and up Chevy/GMC trucks with 2-1/2" wide leaf springs using 9/16 bolt holes. This is a rear leaf spring shackle. This is built from the primary OE Spec design, so it is the best adopted design from all the...

$29.99$39.99 Select optionsSelect options
Chevy GMC - K10/K20/K30 - Front Leaf Spring Shackle Kit

Chevy GMC - K10/K20/K30 - Front Leaf Spring Shackle Kit

OEM #  6272088 This part fits the following make/models: 1973 - 1987 Chevy/GMC K10 K20 K30 Series Trucks This is a front leaf spring Shackle, bushing and bolt kit (rear of front spring) for: *This kit does one spring on one side of the truck *Includes hardware What's In The Box:...

$26.99$29.99 Select optionsSelect options
Leaf Spring Lift or Lowering Blocks (1.5" - 2" - 4" - 5.5")

Leaf Spring Lift or Lowering Blocks (1.5" - 2" - 4" - 5.5")

This is a pair of cast steel leaf spring blocks. They can be used to raise or lower a vehicles height depending on the particular vehicles axle to spring set up. They have a standard pinion angle built in to help reduce the chance of needing to use shims. These...

$29.99$79.99 Select optionsSelect options
Leaf Spring Axle Seat Perch Mount (Pair)

Leaf Spring Axle Seat Perch Mount (Pair)

Leaf spring axle seats are weld on replacements for original axle seats or for custom axle applications 2.5" wide For use with 3" axle tube diameter Made from High Grade OE Spec Steel What's In The Box: 2x Axle Seats

Chevy GMC - C/K/R 10/15/20/25/K5 Blazer/Jimmy - Leaf Spring (Rear, 4 Leaves)

Chevy GMC - C/K/R 10/15/20/25/K5 Blazer/Jimmy - Leaf Spring (Rear, 4 Leaves)

Part Number Location on Vehicle Spring Capacity Number of Leaves
22-525 Rear 1,290lbs 4
*This spring was not originally offered and is an upgrade for the Colorado and Canyon.The centerbolt on the Colorado and Canyon is originally 5/16 and installing this spring will require modification to the centerbolt head or axle seat hole as it comes with a 3/8 centerbolt.

Chevy GMC - K10/20/30 / K5 Blazer / Jimmy - Leaf Spring (Front, 3 Leaves)

Chevy GMC - K10/20/30 / K5 Blazer / Jimmy - Leaf Spring (Front, 3 Leaves)

Part Number Location on Vehicle Spring Capacity Number of Leaves
22-402 Front 1,400lbs 3

U Bolt Body Tie Plate for 3-1/2"

U Bolt Body Tie Plate for 3-1/2"

New U-Bolt Body & Tie-Down Plate   Specifications: Made from Steel Overall Length - 6" Thickness - 1/2" Width - 1-1/2" Hole Diameter - 5/8" Hole Spacing (Between Holes) - 3-9/16" Hole Spacing (Center to Center) - 4-1/4"   What's In The Box: 1 Plate

U Bolt Body Tie Plate for 3"

U Bolt Body Tie Plate for 3"

New U-Bolt Body & Tie-Down Plate   Specifications: Made from Steel Overall Length - 5-1/2" Thickness - 1/2" Width - 1-1/2" Hole Diameter - 5/8" Hole Spacing (Between Holes) - 3-1/16" Hole Spacing (Center to Center) - 3-3/4"   What's In The Box: 1 Plate

Chevy GMC - K10/20/30 / K5 Blazer / Jimmy - Leaf Spring (Front, 4 Leaves)

Chevy GMC - K10/20/30 / K5 Blazer / Jimmy - Leaf Spring (Front, 4 Leaves)

Part Number Location on Vehicle Spring Capacity Number of Leaves
22-402HD Front 1,900lbs 4

Dodge - B300 B350 - Leaf Spring

Dodge - B300 B350 - Leaf Spring

Part Number Location on Vehicle Spring Capacity Number of Leaves
34-213 Rear 2,500lbs 5/1

Chevy GMC - C/K/R 10/15/20/25/K5 Blazer/Jimmy - Leaf Spring (Rear, 7 Leaves)

Chevy GMC - C/K/R 10/15/20/25/K5 Blazer/Jimmy - Leaf Spring (Rear, 7 Leaves)

Part Number Location on Vehicle Spring Capacity Number of Leaves
22-419 Rear 3,390lbs 7
*This spring was not originally offered and is an upgrade for the Colorado and Canyon.The centerbolt on the Colorado and Canyon is originally 5/16 and installing this spring will require modification to the centerbolt head or axle seat hole as it comes with a 3/8 centerbolt.

Chevy GMC - C/K/R 10/15/20/25/K5 Blazer/Jimmy - Leaf Spring (Rear, 7 Leaves)

Chevy GMC - C/K/R 10/15/20/25/K5 Blazer/Jimmy - Leaf Spring (Rear, 7 Leaves)

Part Number Location on Vehicle Spring Capacity Number of Leaves
22-485 Rear 2,775lbs 7
*The 22-485 is a lower arch spring than the 22-489.  For a higher arched spring you can view the 22-489 by clicking HERE*This spring was not originally offered and is an upgrade for the Colorado and Canyon.The centerbolt on the Colorado and Canyon is originally 5/16 and installing this spring...

Chevy GMC - Kodiak/Topkick - Heavy Duty Helper Leaf Spring (Rear, 4 Leaves)

Chevy GMC - Kodiak/Topkick - Heavy Duty Helper Leaf Spring (Rear, 4 Leaves)

Part Number Location on Vehicle Spring Capacity Number of Leaves
22-881HD Rear 2,750lbs 4

Dodge - Ram 2500/3500 - Helper Leaf Spring

Dodge - Ram 2500/3500 - Helper Leaf Spring

Part Number Location on Vehicle Spring Capacity Number of Leaves
34-1321 Rear 575lbs 1
This is a helper spring for the stock 4 leaf spring.

Ford - E-250 E-350 Econoline - Leaf Spring (Rear, 10 Leaves)

Ford - E-250 E-350 Econoline - Leaf Spring (Rear, 10 Leaves)

Part Number Location on Vehicle Spring Capacity Number of Leaves
43-623 Rear 3,235lbs 10
*1978 - 1991 E-350 except passenger vans. This is a direct replacement/upgrade for the OEM factory spring. 

Chevy GMC - C/K/R 10/15/20/25/K5 Blazer/Jimmy - Leaf Spring (Rear, 7 Leaves)

Chevy GMC - C/K/R 10/15/20/25/K5 Blazer/Jimmy - Leaf Spring (Rear, 7 Leaves)

Part Number Location on Vehicle Spring Capacity Number of Leaves
22-489 Rear 2,775lbs 7
*This spring was not originally offered and is an upgrade for the Colorado and Canyon. The centerbolt on the Colorado and Canyon is originally 5/16 and installing this spring will require modification to the centerbolt head or axle seat hole as it comes with a 3/8 centerbolt.

Chevy GMC - C/K/R 10/15/20/25/K5 Blazer/Jimmy - Leaf Spring (Rear, 8 Leaves)

Chevy GMC - C/K/R 10/15/20/25/K5 Blazer/Jimmy - Leaf Spring (Rear, 8 Leaves)

Part Number Location on Vehicle Spring Capacity Number of Leaves
22-499 Rear 3,390lbs 8
*This spring was not originally offered and is an upgrade for the Colorado and Canyon. The centerbolt on the Colorado and Canyon is originally 5/16 and installing this spring will require modification to the centerbolt head or axle seat hole as it comes with a 3/8 centerbolt.

U Bolt Body Tie Plate for 4"

U Bolt Body Tie Plate for 4"

New U-Bolt Body & Tie-Down Plate   Specifications: Made from Steel Overall Length - 6-1/2" Thickness - 1/2" Width - 1-1/2" Hole Diameter - 5/8" Hole Spacing (Between Holes) - 4-1/16" Hole Spacing (Center to Center) - 4-3/4"   What's In The Box: 1 Plate