Showing all 20 results

Leaf Spring Clip Straps (1 3/4" - 2" - 2 1/4" - 2 1/2" - 3")

Leaf Spring Clip Straps (1 3/4" - 2" - 2 1/4" - 2 1/2" - 3")

This is the small metal clip that goes around the leaves of a leaf spring, usually about 1/4 of the way down the length of spring. They are intended to keep your leaves in-line and to keep them from spreading too far away from the main leaf in the event...

Leaf Spring End Tip Wear Pads Anti Squeak Insert

Leaf Spring End Tip Wear Pads Anti Squeak Insert

Leaf spring wear pads go into small holes near the end of individual leaves to prevent leaf dig-in wear and noise caused by metal on metal friction during spring flex. Specifications: 2.5" x 2.5" Square Surface 5/8"L x 3/8"H x 3/8"T Peg What's In The Box: 1 Pad included (multiples...

Leaf Spring Clip Wear Pads Anti Squeak Insert

Leaf Spring Clip Wear Pads Anti Squeak Insert

Leaf Spring Clip wear pads go inside the clips on GM/Chevy trucks to prevent leaf dig-in wear and noise causes my metal on metal friction during spring flex. These are OE Spec and are meant to replace the original pads in the original style clips. For use with 2-1/2" wide...

Leaf Spring Wear Pads Anti Squeak Inserts

Leaf Spring Wear Pads Anti Squeak Inserts

Leaf spring friction pads go into small holes near the end of individual leaves to prevent leaf dig-in wear and noise caused by metal on metal friction during spring flex. Specifications: MGM7 - Surface diameter of 2 1/8" with a 3/8" peg MGM5 - Surface diameter of 2 7/16" with a...

Leaf Spring Lift or Lowering Blocks (1.5" - 2" - 4" - 5.5")

Leaf Spring Lift or Lowering Blocks (1.5" - 2" - 4" - 5.5")

This is a pair of cast steel leaf spring blocks. They can be used to raise or lower a vehicles height depending on the particular vehicles axle to spring set up. They have a standard pinion angle built in to help reduce the chance of needing to use shims. These...

$29.99$79.99 Select optionsSelect options
Leaf Spring Axle Seat Perch Mount (Pair)

Leaf Spring Axle Seat Perch Mount (Pair)

Leaf spring axle seats are weld on replacements for original axle seats or for custom axle applications 2.5" wide For use with 3" axle tube diameter Made from High Grade OE Spec Steel What's In The Box: 2x Axle Seats

Chevy GMC - C/K/R 10/15/20/25/K5 Blazer/Jimmy - Leaf Spring (Rear, 4 Leaves)

Chevy GMC - C/K/R 10/15/20/25/K5 Blazer/Jimmy - Leaf Spring (Rear, 4 Leaves)

Part Number Location on Vehicle Spring Capacity Number of Leaves
22-525 Rear 1,290lbs 4
*This spring was not originally offered and is an upgrade for the Colorado and Canyon.The centerbolt on the Colorado and Canyon is originally 5/16 and installing this spring will require modification to the centerbolt head or axle seat hole as it comes with a 3/8 centerbolt.

U Bolt Body Tie Plate for 3-1/2"

U Bolt Body Tie Plate for 3-1/2"

New U-Bolt Body & Tie-Down Plate   Specifications: Made from Steel Overall Length - 6" Thickness - 1/2" Width - 1-1/2" Hole Diameter - 5/8" Hole Spacing (Between Holes) - 3-9/16" Hole Spacing (Center to Center) - 4-1/4"   What's In The Box: 1 Plate

U Bolt Body Tie Plate for 3"

U Bolt Body Tie Plate for 3"

New U-Bolt Body & Tie-Down Plate   Specifications: Made from Steel Overall Length - 5-1/2" Thickness - 1/2" Width - 1-1/2" Hole Diameter - 5/8" Hole Spacing (Between Holes) - 3-1/16" Hole Spacing (Center to Center) - 3-3/4"   What's In The Box: 1 Plate

Chevy GMC Hummer - Colorado/Canyon/H3/H3T - Rear Leaf Spring Shackle

Chevy GMC Hummer - Colorado/Canyon/H3/H3T - Rear Leaf Spring Shackle

This part fits the following make/models: 2004 - 2011 GMC Canyon 2004 - 2001 Chevy Colorado 2006 - 2010 Hummer H3 2009 - 2010 Hummer H3T This is a BRAND NEW OEM Spec rear leaf spring shackle for Canyon/Colorado Models and H3 Hummer from 2004 - 2011. Its an aftermarket heavy...

Dodge - B300 B350 - Leaf Spring

Dodge - B300 B350 - Leaf Spring

Part Number Location on Vehicle Spring Capacity Number of Leaves
34-213 Rear 2,500lbs 5/1

Chevy GMC - C/K/R 10/15/20/25/K5 Blazer/Jimmy - Leaf Spring (Rear, 7 Leaves)

Chevy GMC - C/K/R 10/15/20/25/K5 Blazer/Jimmy - Leaf Spring (Rear, 7 Leaves)

Part Number Location on Vehicle Spring Capacity Number of Leaves
22-485 Rear 2,775lbs 7
*The 22-485 is a lower arch spring than the 22-489.  For a higher arched spring you can view the 22-489 by clicking HERE*This spring was not originally offered and is an upgrade for the Colorado and Canyon.The centerbolt on the Colorado and Canyon is originally 5/16 and installing this spring...

Dodge - Ram 2500/3500 - Helper Leaf Spring

Dodge - Ram 2500/3500 - Helper Leaf Spring

Part Number Location on Vehicle Spring Capacity Number of Leaves
34-1321 Rear 575lbs 1
This is a helper spring for the stock 4 leaf spring.

Sterling Bullet 4500 5500 Leaf Spring

Sterling Bullet 4500 5500 Leaf Spring

Part Number Location on Vehicle Spring Capacity Number of Leaves
34-1549 Rear 4,000lbs 9

Dodge - Dakota (2WD 4WD) - Leaf Spring

Dodge - Dakota (2WD 4WD) - Leaf Spring

Part Number Location on Vehicle Spring Capacity Number of Leaves
34-1503 Rear 1,800lbs 4/1

Ford - E-250 E-350 Econoline - Leaf Spring (Rear, 10 Leaves)

Ford - E-250 E-350 Econoline - Leaf Spring (Rear, 10 Leaves)

Part Number Location on Vehicle Spring Capacity Number of Leaves
43-623 Rear 3,235lbs 10
*1978 - 1991 E-350 except passenger vans. This is a direct replacement/upgrade for the OEM factory spring. 

Chevy GMC - Colorado Canyon - Heavy Duty Leaf Spring (Rear, 4 Leaves)

Chevy GMC - Colorado Canyon - Heavy Duty Leaf Spring (Rear, 4 Leaves)

Part Number Location on Vehicle Spring Capacity Number of Leaves
22-1419HD Rear 1,600lbs 4
*This spring originally came on the 4wd model, and while it is compatible with the 2wd model it will sit taller than stock.

Chevy GMC - C/K/R 10/15/20/25/K5 Blazer/Jimmy - Leaf Spring (Rear, 7 Leaves)

Chevy GMC - C/K/R 10/15/20/25/K5 Blazer/Jimmy - Leaf Spring (Rear, 7 Leaves)

Part Number Location on Vehicle Spring Capacity Number of Leaves
22-489 Rear 2,775lbs 7
*This spring was not originally offered and is an upgrade for the Colorado and Canyon. The centerbolt on the Colorado and Canyon is originally 5/16 and installing this spring will require modification to the centerbolt head or axle seat hole as it comes with a 3/8 centerbolt.

Chevy GMC - C/K/R 10/15/20/25/K5 Blazer/Jimmy - Leaf Spring (Rear, 8 Leaves)

Chevy GMC - C/K/R 10/15/20/25/K5 Blazer/Jimmy - Leaf Spring (Rear, 8 Leaves)

Part Number Location on Vehicle Spring Capacity Number of Leaves
22-499 Rear 3,390lbs 8
*This spring was not originally offered and is an upgrade for the Colorado and Canyon. The centerbolt on the Colorado and Canyon is originally 5/16 and installing this spring will require modification to the centerbolt head or axle seat hole as it comes with a 3/8 centerbolt.

U Bolt Body Tie Plate for 4"

U Bolt Body Tie Plate for 4"

New U-Bolt Body & Tie-Down Plate   Specifications: Made from Steel Overall Length - 6-1/2" Thickness - 1/2" Width - 1-1/2" Hole Diameter - 5/8" Hole Spacing (Between Holes) - 4-1/16" Hole Spacing (Center to Center) - 4-3/4"   What's In The Box: 1 Plate