This is the small metal clip that goes around the leaves of a leaf spring, usually about 1/4 of the way down the length of spring. They are intended to keep your leaves in-line and to keep them from spreading too far away from the main leaf in the event...
Leaf spring wear pads go into small holes near the end of individual leaves to prevent leaf dig-in wear and noise caused by metal on metal friction during spring flex. Specifications: 2.5" x 2.5" Square Surface 5/8"L x 3/8"H x 3/8"T Peg What's In The Box: 1 Pad included (multiples...
Leaf Spring Clip wear pads go inside the clips on GM/Chevy trucks to prevent leaf dig-in wear and noise causes my metal on metal friction during spring flex. These are OE Spec and are meant to replace the original pads in the original style clips. For use with 2-1/2" wide...
Leaf spring friction pads go into small holes near the end of individual leaves to prevent leaf dig-in wear and noise caused by metal on metal friction during spring flex. Specifications: MGM7 - Surface diameter of 2 1/8" with a 3/8" peg MGM5 - Surface diameter of 2 7/16" with a...
This part fits the following make/models: 1988 - 2007 1/2 Chevy Silverado 1500 1988 - 2007 1/2 GMC Sierra 1500 1988 - 2010 Chevy 2500/2500HD 1988 - 2010 GMC 2500/2500HD 1988 - 2010 Chevy 3500/3500HD 1988 - 2010 GMC 3500/3500HD 1992 - 1999 Chevy/GMC Suburban 1500 1992 - 1999 Chevy/GMC Suburban...
Leaf spring axle seats are weld on replacements for original axle seats or for custom axle applications 2.5" wide For use with 3" axle tube diameter Made from High Grade OE Spec Steel What's In The Box: 2x Axle Seats
This is a pair of cast steel leaf spring blocks. They can be used to raise or lower a vehicles height depending on the particular vehicles axle to spring set up. They have a standard pinion angle built in to help reduce the chance of needing to use shims. These...
New U-Bolt Body & Tie-Down Plate Specifications: Made from Steel Overall Length - 6" Thickness - 1/2" Width - 1-1/2" Hole Diameter - 5/8" Hole Spacing (Between Holes) - 3-9/16" Hole Spacing (Center to Center) - 4-1/4" What's In The Box: 1 Plate
Part Number | Location on Vehicle | Spring Capacity | Number of Leaves |
---|---|---|---|
22-1169 | Rear | 2,485lbs | 5 |
New U-Bolt Body & Tie-Down Plate Specifications: Made from Steel Overall Length - 5-1/2" Thickness - 1/2" Width - 1-1/2" Hole Diameter - 5/8" Hole Spacing (Between Holes) - 3-1/16" Hole Spacing (Center to Center) - 3-3/4" What's In The Box: 1 Plate
This part fits the following make/models: 1999 - 2007 Chevy/GMC 1500 2500 and 3500 Silverado/Sierra pickups 2000 - 2007 Suburban/Yukon XL 2500 2002 - 2007 Avalanche 2500/ Escalade/Tahoe 2500 OE Spec Solution Heavy Build Heavy Duty. Includes hardware What's In The Box: 1 Hanger 1 eyebolt 4 mounting bolts
Part Number | Location on Vehicle | Spring Capacity | Number of Leaves |
---|---|---|---|
22-907 | Rear | 2,760lbs | 6 |
Part Number | Location on Vehicle | Spring Capacity | Number of Leaves |
---|---|---|---|
22-905 | Rear | 2,200lbs | 5 |
Part Number | Location on Vehicle | Spring Capacity | Number of Leaves |
---|---|---|---|
22-1209HD | Rear | 4,600lbs | 10 |
Part Number | Location on Vehicle | Spring Capacity | Number of Leaves |
---|---|---|---|
22-1209 | Rear | 3,710lbs | 9 |
Part Number | Location on Vehicle | Spring Capacity | Number of Leaves |
---|---|---|---|
22-1175 | Rear | 3,710lbs | 3 |
New U-Bolt Body & Tie-Down Plate Specifications: Made from Steel Overall Length - 6-1/2" Thickness - 1/2" Width - 1-1/2" Hole Diameter - 5/8" Hole Spacing (Between Holes) - 4-1/16" Hole Spacing (Center to Center) - 4-3/4" What's In The Box: 1 Plate