Search By Vehicle Make/Model
Leaf Spring Clip Straps (1 3/4" - 2" - 2 1/4" - 2 1/2" - 3")
This is the small metal clip that goes around the leaves of a leaf spring, usually about 1/4 of the way down the length of spring. They are intended to keep your leaves in-line and to keep them from spreading too far away from the main leaf in the event...
Leaf Spring Wear Pads Anti Squeak Inserts
Leaf spring friction pads go into small holes near the end of individual leaves to prevent leaf dig-in wear and noise caused by metal on metal friction during spring flex. Specifications: MGM7 - Surface diameter of 2 1/8" with a 3/8" peg MGM5 - Surface diameter of 2 7/16" with a...
Leaf Spring End Tip Wear Pads Anti Squeak Insert
Leaf spring wear pads go into small holes near the end of individual leaves to prevent leaf dig-in wear and noise caused by metal on metal friction during spring flex. Specifications: 2.5" x 2.5" Square Surface 5/8"L x 3/8"H x 3/8"T Peg What's In The Box: 1 Pad included (multiples...
Leaf Spring Clip Wear Pads Anti Squeak Insert
Leaf Spring Clip wear pads go inside the clips on GM/Chevy trucks to prevent leaf dig-in wear and noise causes my metal on metal friction during spring flex. These are OE Spec and are meant to replace the original pads in the original style clips. For use with 2-1/2" wide...
Leaf Spring Eye Bolts (Standard Sizes)
Product Description: This is a replacement leaf spring eye bolt with nut. It's a grade 5 hardened steel bolt that fits the front eye of the rear leaf spring on GM F-body cars including Camaro, Firebird/TransAm and Nova. 1/2 O.D. x 5" length Actual bolt may be plated or non-plated...
Leaf Spring Center Bolt Pins
This is a 5/16 x 6" Center Bolt for a leaf spring. It has threads most of the way down and extra length can be cut off after the nut has been tightened. Other sizes are available as well. *BE ADVISED - Leaf Spring Center Bolts are NOT hardened and...
Leaf Spring Lift or Lowering Blocks (1.5" - 2" - 4" - 5.5")
This is a pair of cast steel leaf spring blocks. They can be used to raise or lower a vehicles height depending on the particular vehicles axle to spring set up. They have a standard pinion angle built in to help reduce the chance of needing to use shims. What's...
Leaf Spring Eye Bolt (Metric Sizes)
Product Description: This is a replacement leaf spring eye bolt with nut. Its a grade 10.9 hardened steel bolt that typically fits many standard truck and van springs. 14mm O.D. 100mm Long Actual bolt may be plated or non-plated What's In The Box: 1 bolt 1 nut We do combine...
Chevy GMC - C10/C20/C30/K30/Suburban - Leaf Spring (Rear, 9 Leaves)
This leaf spring fits the following make/models: 1977 - 1991 Chevy/GMC C30 & K30 1973 - 1987 Chevy/GMC C10 & C20 1973 - 1988 Chevy Suburban (2WD) 1980 - 1988 Chevy Suburban (4WD) OEM Number 357246 Width 2 1/2 PL-1 S.E. 26 PL-1 L.E. 30 S.E. Bushing RB-136 L.E. Bushing...
Chevy GMC - G20/G25/C20/C25/P30/P35 - Coil Springs (Front, Heavy Duty)
These coil springs fit the following make/models: 1973-1987 Chevy/GMC C20/2500 2wd Pickup 1973-1995 Chevy/GMC Van G20/2500 2WD 1973-2005 Chevy/GMC P30/3500 2WD Motorhome TUFTRUCK TTC-5415 heavy duty front coil spring kit is specifically engineered to significantly increase the front end support of make/models listed above at stock ride height. The TTC-5415 was...
Chevy GMC - Pickup Truck - Leaf Spring (Main Leaf)
This leaf spring fits the following make/models: 1973 - 1987 Chevy/GMC Trucks Using 26" x 26" Main Leaves This is a direct replacement for the stock main leaf. OEM Number N/A Width 2 1/2 PL-1 S.E. 26 PL-1 L.E. 26 S.E. Bushing RB-117 L.E. Bushing RB-117 Arch N/A No of...
Leaf Spring Axle Seat Perch Mount (Pair)
Leaf spring axle seats are weld on replacements for original axle seats or for custom axle applications 2.5" wide For use with 3" axle tube diameter Made from High Grade OE Spec Steel What's In The Box: 2x Axle Seats