Showing all 17 results

Leaf Spring Clip Straps (1 3/4" - 2" - 2 1/4" - 2 1/2" - 3")

Leaf Spring Clip Straps (1 3/4" - 2" - 2 1/4" - 2 1/2" - 3")

This is the small metal clip that goes around the leaves of a leaf spring, usually about 1/4 of the way down the length of spring. They are intended to keep your leaves in-line and to keep them from spreading too far away from the main leaf in the event...

Leaf Spring End Tip Wear Pads Anti Squeak Insert

Leaf Spring End Tip Wear Pads Anti Squeak Insert

Leaf spring wear pads go into small holes near the end of individual leaves to prevent leaf dig-in wear and noise caused by metal on metal friction during spring flex. Specifications: 2.5" x 2.5" Square Surface 5/8"L x 3/8"H x 3/8"T Peg What's In The Box: 1 Pad included (multiples...

Leaf Spring Clip Wear Pads Anti Squeak Insert

Leaf Spring Clip Wear Pads Anti Squeak Insert

Leaf Spring Clip wear pads go inside the clips on GM/Chevy trucks to prevent leaf dig-in wear and noise causes my metal on metal friction during spring flex. These are OE Spec and are meant to replace the original pads in the original style clips. For use with 2-1/2" wide...

Leaf Spring Wear Pads Anti Squeak Inserts

Leaf Spring Wear Pads Anti Squeak Inserts

Leaf spring friction pads go into small holes near the end of individual leaves to prevent leaf dig-in wear and noise caused by metal on metal friction during spring flex. Specifications: MGM7 - Surface diameter of 2 1/8" with a 3/8" peg MGM5 - Surface diameter of 2 7/16" with a...

Chevy GMC - Trucks - Rear Leaf Spring Shackle

Chevy GMC - Trucks - Rear Leaf Spring Shackle

OEM # 14022597 / 6270217 This part fits the following make/models: 1967 and up Chevy/GMC trucks with 2-1/2" wide leaf springs using 9/16 bolt holes. This is a rear leaf spring shackle. This is built from the primary OE Spec design, so it is the best adopted design from all the...

$29.99$39.99 Select optionsSelect options
Chevy GMC - Silverado/Sierra/Savanna/Blazer/Tahoe/Yukon - Leaf Spring Bushings (RB172)

Chevy GMC - Silverado/Sierra/Savanna/Blazer/Tahoe/Yukon - Leaf Spring Bushings (RB172)

This part fits the following make/models: 1992 - 1996 G30/3500 Chassis Motorhomes (both eyes of the rear spring) G1500 G2500 and G3500 Savanna and Express vans 2004 - Current Colorado and Canyon (both eyes on the rear springs) 1992 - 2000 Blazer, Jimmy, Tahoe, Yukon, Denali, and Escalade (both eyes on the...

Chevy GMC - Rear Leaf Spring Bushings (RB250)

Chevy GMC - Rear Leaf Spring Bushings (RB250)

This part fits the following make/models: 1999 - 2017 Chevy Silverado 1500 and GMC Sierra 1500 (Front eyes of the rear spring) 1999 - 2010 Chevy Silverado 2500/2500HD and GMC Sierra 2500/2500HD (front eyes of the rear spring) 1999 - 2010 Chevy Silverado 3500/3500HD and GMC Sierra 3500/3500HD (front eyes of...

Leaf Spring Axle Seat Perch Mount (Pair)

Leaf Spring Axle Seat Perch Mount (Pair)

Leaf spring axle seats are weld on replacements for original axle seats or for custom axle applications 2.5" wide For use with 3" axle tube diameter Made from High Grade OE Spec Steel What's In The Box: 2x Axle Seats

Leaf Spring Lift or Lowering Blocks (1.5" - 2" - 4" - 5.5")

Leaf Spring Lift or Lowering Blocks (1.5" - 2" - 4" - 5.5")

This is a pair of cast steel leaf spring blocks. They can be used to raise or lower a vehicles height depending on the particular vehicles axle to spring set up. They have a standard pinion angle built in to help reduce the chance of needing to use shims. These...

$29.99$79.99 Select optionsSelect options
Leaf Spring Eye Bolt Adaptor Kit - 16mm to 9/16"

Leaf Spring Eye Bolt Adaptor Kit - 16mm to 9/16"

These eye bolt adaptors convert 16mm to 9/16" allowing you to use rear leaf springs from the previous generation (1988-1998) Chevy/GMC pickups (1/2 ton 3/4 ton and 1 ton) on the newer generation trucks which come with lighter capacity leaf springs and are typically a lot more expensive. It's a...

Chevy GMC - 1500/2500/3500 Pickup Truck - Leaf Spring (Rear, 6 Leaves)

Chevy GMC - 1500/2500/3500 Pickup Truck - Leaf Spring (Rear, 6 Leaves)

Part Number Location on Vehicle Spring Capacity Number of Leaves
22-1289 Rear 2,235lbs 5/1

Chevy GMC - 1500/2500/3500 Pickup Truck - Leaf Spring (Rear, 6 Leaves, Heavy Duty)

Chevy GMC - 1500/2500/3500 Pickup Truck - Leaf Spring (Rear, 6 Leaves, Heavy Duty)

Part Number Location on Vehicle Spring Capacity Number of Leaves
22-1289HD Rear 3,200lbs 5/1

U Bolt Body Tie Plate for 3-1/2"

U Bolt Body Tie Plate for 3-1/2"

New U-Bolt Body & Tie-Down Plate   Specifications: Made from Steel Overall Length - 6" Thickness - 1/2" Width - 1-1/2" Hole Diameter - 5/8" Hole Spacing (Between Holes) - 3-9/16" Hole Spacing (Center to Center) - 4-1/4"   What's In The Box: 1 Plate

Chevy GMC - Silverado Sierra 1500/2500/3500 - Leaf Spring (Rear, 8 Leaves, Heavy Duty)

Chevy GMC - Silverado Sierra 1500/2500/3500 - Leaf Spring (Rear, 8 Leaves, Heavy Duty)

Part Number Location on Vehicle Spring Capacity Number of Leaves
22-1269HD Rear 3,300lbs 7/1
This is an upgrade for the stock springs on any model of Silverado/Sierra. It was designed more for extra heavy applications on the 3500 1 ton models, but it can be used on lighter versions as well. This spring is NOT recommended for the 1500 model. It will fit but...

U Bolt Body Tie Plate for 3"

U Bolt Body Tie Plate for 3"

New U-Bolt Body & Tie-Down Plate   Specifications: Made from Steel Overall Length - 5-1/2" Thickness - 1/2" Width - 1-1/2" Hole Diameter - 5/8" Hole Spacing (Between Holes) - 3-1/16" Hole Spacing (Center to Center) - 3-3/4"   What's In The Box: 1 Plate

USA Made - Chevy GMC - Trucks - Rear Leaf Spring Shackle

OEM # 14022597 / 6270217 This part fits the following make/models: 1967 and up Chevy/GMC trucks with 2-1/2" wide leaf springs using 9/16 bolt holes. This is a rear leaf spring shackle. This is built from the primary OE Spec design, so it is the best adopted design from all the...

U Bolt Body Tie Plate for 4"

U Bolt Body Tie Plate for 4"

New U-Bolt Body & Tie-Down Plate   Specifications: Made from Steel Overall Length - 6-1/2" Thickness - 1/2" Width - 1-1/2" Hole Diameter - 5/8" Hole Spacing (Between Holes) - 4-1/16" Hole Spacing (Center to Center) - 4-3/4"   What's In The Box: 1 Plate